b'Grampian Parts $ All Prices in237Canadian Dollars $Grampian Toe Rail Made of extruded aluminum anodized black. This is the original profile use by Grampian Marine later in production on boats with aluminum toe rail.By about 1973 Grampian Marine started to use aluminum toe rail instead of the teak toe rail used originally.This toe rail is used to replace the old teak toe rail which will allow you to use the aluminum stanchion bases.By moving the stanchions to the toe rail it will considerably increase the deck area!Will fit all Grampians, 26, 28, 30, 34, 34-2. Drilled for1/4 counter sunk fasteners, oval holes for snatch blocks on 13-1/2 centers.1-1/2 high x 1-1/2 wide, with a 1/4 lip outboard.This toe rail is new, but due to its age there may be a scratch or two on it. #GM5$ 429.98/12 lengthGrampian Stanchion Bases Made of cast aluminum, black power coated.These were on by Grampian Marine later in production on boats with aluminum toe rail.By about 1973 Grampian Marine started to use aluminum toe rail instead of the teak toe rail used originally.If your stanchion bases are on the deck, this is the base for you.By moving the stanchions to the toe rail it will considerably increase the deck area!Will fit all Grampians with the aluminum toe rail, 26, 28, 30, 34, 2-34. #GM3for 7/8 stanchions$ 169.98 #GM3-1for 1 stanchions$ 169.98Grampian Goose neck and Track Original goose neck and track made by Barton. Also used on many otherGrampian Tiller Cap and Strap boats built in the 70s like tanzers. Made from the original molds Chromed bronze slide and thumbfrom the 50s. Fits Grampian screw with black track. #34 and #3526-34 with a tiller.If it looks like are the parts we can supply.this this is it.Cap is machined #BARTON $139.98 for 1.Strap is not machined.(most people do not need the strap and we must cast as a set)Strap can be supplied machined at an extra cost. #GM4$ 439.98email: hmp@hollandmarine.comwebsite: www.hollandmarine.comfax:905-891-7972tel:905-891-1639 237'