CS Parts Page 3

CS Parts,page1, page 2, page 4

Back to main page

 


ALL PRICES IN CANADIAN DOLLARS

All CS rudders are available from us. Email for a quote on price and availability.


Attention CS30 owners!

Did you know that all CS30 holding tanks can not be pumped out completely?? The pump out fitting on the tank is on the forward end of the tank, yet the deep end of the tank is aft. The aft end of the tank is at least 4" deeper than the bow end. We have created a new bent pick-up tube that will allow you to pump out your tank completely for the first time! This new tube can be installed by unscrewing the pump out fitting from the tank and simply thread in the new pump-out fitting with the new pick-up tube. Careful not to cross-thread. Use teflon plumbing tape on the threads to seal and you are done.

$52.50


#CS1................................... #CS2...................... #CS3................................ #CS4

#CS1 is a Stainless welded strut as used on CS40 $ 429.00

#CS2 is a cast bronze strut (as used on CS33, CS36trad?) $ 384.00

#CS3 is a cast bronze strut as used on CS36M $406.00

#CS4 is a cast bronze strut as used on CS30 and CS34

#CS4 is a cast bronze strut as used on and CS34


CS 27 rudder cap and strap.

We also have CS27 Aluminum rudder castings and rudder gudgeons and pintles.


CS40 and CS36 merlin captains seat and propane locker lids now available. Hump style and flat, teak inlay or not.


CS36 Tradional Propane locker lids, specify port or stbd, almond or white gelcoat.


CS Merlin Anchor locker lid now available, call for price.


CS40 cockpit locker lid, specify with teak inlay or not, call for price

CS 36 merlin cockpit locker lid, call for price.


Original CS spreader boot caps. small #CS30 $20.00ea, medium #CS31 $27.80, large #CS32 $ 30.00ea

The CS 27 with and isomat mast takes the CS30 boot

The CS 30 takes the CS30 for the upper spreaders, the CS31 for the lower spreader.

The CS36merlin takes the CS30 for the upper spreader, the CS31 for the lower spreader.

The CS40 uses the CS31 for the upper spreader, CS32 for the lower spreader.


CS 22 Rudder casting Now available


We have original Merriman pods as used on CS33 and CS36trad.

WE WILL CONTINUE TO LOAD SPECIFIC CS PARTS ON THIS PAGE....LOTS TO MORE TO COME!

 

Back to top

CS Parts,page1, page 2, page 4

Back to main page

Legal Stuff !